ESD Pliers and Cutters

Specialty Electronics Tools

Made from high carbon steel. Accurately machined, these high quality precision tools are designed for fine assembly operations on electronic circuits. Following styles are available with side cutter, flat, round and bent nose, allowing bending setting shaping operations, even in confined areas. Accurate heat treatment provides the necessary performance and durability.

An exceptionally clean smooth cut. Light-weight and easy handle. Particularly finished in consideration of its use in the electronic field and for thousands of finishing cuts of leads.

AT-101-E
5” Micro Cutting Pliers w/Conductive Handle

AT-25P-CE
5” Micro Cutting Pliers w/Conductive Handle and Safety Clip

Cutting capacity: 16AWG (1.3mm)

AT-30-E
5” Micro Cutting Pliers (125mm) w/Conductive Handle

AT-5101-E
Heavy Duty Cutting Pliers (125mm) w/Conductive Handle

Cutting capacity: 14AWG (1.6mm)

Cutting capacity: 12AWG (2mm)

AT-25P-E
5” Micro Cutting Pliers w/Conductive Handle

AT-5101-CE
Heavy Duty Cutting Pliers w/Conductive Handle and Safety Clip

Cutting capacity: 16AWG (1.3mm)

Cutting capacity: 12AWG (2mm) soft wire

AT-102-E
6” Long nose pliers (150mm) w/Conductive Handle

AT-105-E
6” Bent nose pliers (150mm) w/Conductive Handle

AT-103-E
Round nose pliers (140mm) w/Conductive Handle

AT-5102-E
Heavy Duty Long Nose Pliers (150mm) w/Conductive Handle

AT-104-E
6” Flat nose pliers (150mm) w/Conductive Handle

AT-209
Antistatic Clean cut micro nipper

A very high precision nipper. The 50° Angular nose facilitates work on inclined and difficult planes.
Cutting capacity up to 22AWG.

AT-210
Antistatic Clean cut micro nipper

AT-211
Antistatic Clean cut micro nipper

This nipper was designed with integrated circuits in mind. It is suitable for closely spaced leads of micro and SMT IC'S.
Cutting capacity up to 22AWG.

This nipper was designed for delicate work.
Cutting capacity: 0.8mm-20AWG soft wire.

AT-3001-E & AT-3002-E
Precision Wire Stripper w/Conductive Handle

Stripping without damaging the conductors and can be used as pliers, shears and wire strippers.
Built-in closed stopper.
Less fatiguing, constant force recovery spring added.
Precision pliers. Almost equal to precision tweezers.
Provide easy work with high density P.C.B’s.
Ergonomically shaped, non-slip grips and lightweight for operator comfort.

Conductive Handle

Cut Copper Only	AT-3001E	AWG	30, 28, 26, 24, 22, 20
	AT-3001E	MM	0.2, 0.3, 0.4, 0.5, 0.6, 0.8
	AT-3002E	AWG	20, 18, 16, 14, 12, 10
	AT-3002E	MM	0.8, 1.0, 1.3, 1.6, 2.0, 2.6

Previous page | Print page