Overhead Critical Environment

Minimal contamination ioniser.
Rapid static discharge neutralisation of insulators. Designed for use in clean rooms.
Emitter cassettes (U.S. Patent 6,137,670) slide out easily for cleaning and replacement.
Faster and better emitter cleaning can be done away from the workstation and away from your product; eliminates workstation down time.
Multiple high output fans.
Provides more consistent and wider coverage.
Overhead mounting.
No waste of valuable work surface space.
Closed-loop feedback electronic balance system.
Continuously monitors output for best performance.
RJ45 port.
Auto-calibration and monitoring capability.
Data output.
Provides for remote monitoring of critical functions.
Sealed plenum chamber around each fan.
Minimal contamination.
Non-volatile adjustment for balance and fan speed.
Maintains settings in the absence of power.
Lockout key and distinctive front panel indicator.
Prevents unauthorized adjustment, with visual feedback.
IEC input and output connectors.
Simplifies daisy-chaining of up to 2 units.
Balance ±10 voltage offset
Flashing front panel display.
Signals when cleaning is needed.
Balance individually adjustable.
Accuracy and performance at each fan zone.
Made in America
Superior Quality

92260

92261

92117

92327

92262

92264

Chargebuster Overhead Ionizer

Shrouded 3 Blade Fan Design with Steady State DC Ionisation
Allows for better coverage (2’ x 5’), consistent balance ±10 Volts, and superior decay rate (<3 seconds)
Auto-Feedback System (Audible And Visual Alarm Through Single Tri-Color LED)
Unit will automatically shut down and alarm if/when supply voltage drops
120/220 VAC Input Voltage Selectable
Unit can we used with 110V or 220V power sources
3 Position Fan Speed: Low, Medium, High
Ionisation performance is consistent at all speeds and allows for use with sensitive applications, such as calibration, test, or repair procedures
Replaceable Emitter Pins
Field replaceable emitter pins allow for minimal downtime
Made in America

50681

Best Overhead Ionizer Now Available from Desco EMIT
Low Balance (Offset Voltage)
Balance ±3 volt, typically; ±5 volts maximum controlled via Desco EMIT patented Auto-Balancing Sense Feedback
Fast Discharge Time
Tested at 3.1 seconds Neutralization Discharge Time under fan 1,000 volts to 100 volts per ESD S3.1 (18" under fans)
Data Acquisition
Data acquisition via RS485 to computer recording levels of performance at all times
Calibration
Easy to adjust or calibrate with control buttons on the unit, no adjustments tools are needed. Optional battery operated hand-held Infrared Remote Control to adjust offset voltage (balance), and maintenance and alarm levels (using Charged Plate Monitor)
Overhead installation with two 9-speed fans
Up to 124 units can be daisy-chained into one serial port
Optional Remote Control Available
Model 50669 I/R remote control can be used to remotely adjust balance, fan speed and alarm settings up to 9 feet away.
5 Year Limited Warranty
CSA Approved
Made in America

50671

50672

50658

50668

50669

93000

Part Number	Description
92117	PHOTOELECTRIC SWITCH
92260	IONISER, OVERHEAD, CE 61CM 220VAC
92261	IONISER, OVERHEAD, CE 122CM 220VAC
92327	FILTER SCREEN, REPLACEMENT, IONISER
92262	EMITTER CASSETTE, OVERHEAD IONISER, CE, PAIR
92264	EMITTER PIN, CE IONIZER, PACK OF 20
50681	IONIZER, OVERHEAD, CHARGEBUSTER, 220VAC, NO CORD
50671	IONIZER, OVERHEAD, 2-FAN, ZVI, STAINLESS STEEL, 220VAC
50672	IONIZER, OVERHEAD, 3-FAN, 220VAC
50658	EMITTER POINT TIP CLEANER 20 PACK
50668	REPLACEMENT EMITTER POINTS FOR ZVI, PACK OF 8
50659	REPLACEMENT EMITTER POINTS FOR ZVI, PACK OF 100
50669	REMOTE CONTROL, INFRARED HAND HELD PROGRAMMER FOR IONIZERS
93000	POWER CORD,SCHUKO, 2M, IEC
93010	POWER CORD,UK, 2M, IEC END