Products > CHARLESWATER > Continuous Workstation Monitors

Continuous Workstation Monitors

  • Small size - 70mm x 53mm.
    Takes up minimal worksurface area.
  • Two 10mm threaded studs installed on bottom of unit.
    Permanently snap monitor flush on mat.
  • Two 10mm push and clinch sockets included.
    Easy installation on mat - no added wires.
  • Stand-by 4mm and 10mm parking snap.
    Keeps unit from going into alarm when user disconnects cord.
  • Real-time monitoring of ESD workstation including wrist strap, mat, and cords.
    Pays for itself - ensures ESD protected workstation, reducing catastrophic and latent defects.
  • Utilizes reliable wave distortion technology.
    Provides true 100% continuous monitoring. Cannot be fooled; no false alarms. Not pulsed current which is off over 90% of the time.
  • Can be used with any brand of single-wire wrist strap and cord.
    With less expensive, more durable single-wire components, life-cycle costs of monitor/wirst strap/cord are up to 66% lower than dual-wire approach.
  • Miniscule electrical current required to generate waveform.
    No reported case of skin irritation.
  • Designed for use by 1.5m tall 40.8kg person to 1.83m 113.8kg person.
    Individual adjustment for each operator is almost never necessary.
  • Provided with calibration to European standards.
    Simple means to assure accurate performance. Lower calibration life cycle costs.
  • Convertor included.
    Converts a 4mm banana jack to a 10mm stud
  • Made in America
    Superior Quality
 99130
99130
99011
99130

Please note: The power adaptor must be ordered separately.

Specifications:

  • Worksurface limit set to 500 Meg Ohms (5 x 10^8)
  • Operator wrist strap range 1Meg Ohms to 10 Meg Ohms
  • Compatible with mats:
    Statfree Euro-T2™, Statfree Z2™, Statfree O™, Statfree CE™, and Micastat®

Note: Work surface must have a conductive layer such as Dual Layer Rubber or Dissipative 3-Layer Vinyl or Micastat® Dissipative Laminate with conductive buried layers. Our Continuous Monitors are not recommended for use with homogeneous matting.

Note: Continuous Monitors pay for themselves improving quality, productivity, eliminating wrist strap daily testing and test result logging.

How to order:

Part Number Description
99130 MONITOR, WORKSTATION, JEWEL MINI 220VAC SAPPHIRE
99011 ADAPTOR, 24VAC 220V, MONITORS, IEC INPUT UNIVERSAL
  |  Print page